DYNO-TAB Power Booster Fuel Tablets is safe and affordable. Increase your car's gas mileage between 12-20% with Dyno-Tab, a 100% organic fuel additive that simultaneously improves fuel economy and power by increasing your fuel's octane. Stop throwing away your money on highly priced gasoline. You'll see a difference in your car's performance and, with today's gas prices, you'll also see a difference in your wallet.
Package includes: 10 tablets per tube each tablet treats 16 gallons.

Increase your car's gas mileage between 12-20% with Dyno-tab®, a 100% organic fuel additive that simultaneously improves fuel economy and power by increasing your fuel's octane. No longer will you have to pay premium prices at the pump for the benefits of premium unleaded gas.

How does it work?
Dyno-tab® has been scientifically proven to reduce fuel consumption, improve performance, improve octane rating and reduce emissions. They contain 100% active ingredients, which means that unlike other bottled fuel additives, Dyno-tab ® burns completely without harming your engine. With Dyno-tab® your car will burn fuel completely and cleanly, reducing environmentally-harmful emissions and the carbon deposits in your engine. The boost in octane also means that your car will burn fuel more efficiently, leading to more miles per gallon and a noticeable increase in power and performance.

How do I use it?
It's easy. Before your next fill-up, simply remove your gas cap and place one Dyno-tab® directly into the fuel tank. Fill up your car and immediately begin enjoying the results of cleaner, more efficient fuel.   Dyno-tab® fully dissolves when added to the fuel tank at fill-up.

Each Dyno-tab® tablet treats up to 16 gallons of gasoline. To experience the full benefits of Dyno-tab® be sure to use it with every fill-up.

You'll see a difference in your car's performance and, with today's gas prices, you'll also see a difference in your wallet.

More about Dyno-Tabs:

• Tested and registered by the U.S. Environmental Protection Agency (EPA)
• Dyno-Tab lowers Carbon Dioxide emissions by 50-80%
• 1 tablet treats 16 gallons of gas
• 10 tablets per tube
• Frequently Asked Questions (below)

Dyno-tab ® is made from the same quality chemical components used by many major U.S. brand names in bottled products, including Chemplex ®.

In response to a worldwide demand for products that are environmentally friendly, Dyno-tab ® generates less waste than the packaging components in cans and plastic bottles.

Frequently Asked Questions:

Q: What is Dyno-tab®?
A: Dyno-tab® is a solid form of fuel additive that dissolves completely in fuel to enhance driveability and vehicle performance. It is a combustion catalyst, which basically means it helps deliver a more complete burn of the fuel you buy. Dyno-tab® is made from 100% active ingredients and eliminates the packaging and handling costs associated with traditional bottle products. It is available in three sizes for convenient use with large or small fuel tank applications.

Q: How do I get Dyno-tab® into the fuel tank?
A: Remove the gas cap and place one Dyno-tab® directly into the fuel tank by placing it on the trap. When you insert the nozzle to fill the tank, the trap door is pushed open and the tablet falls in. Not all cars have traps so be careful not to drop in anything other than the tablet.

Use safety precautions, as with any fuel additive. Always store tablets in a safe place away from children.

Q: How is Dyno-tab® different from typical gas additive products on the market that are sold in bottles?
A: Dyno-tab® works the same way as the traditional additive sold in bottles, but costs less and is more convenient. About 90% of the typical additive is special carrier fluids and 10% or less is the active ingredient. Dyno-tab® is the active ingredient reduced to a solid form and pressed in to a tablet. The end result is a lighter weight package that costs less than the traditional can, label and cap. Freight and storage costs are a fraction of the cost of traditional bottled products. See Consider the Advantages for greater detail about this. In addition to the convenience of handling for the customer, Dyno-tab® is also considered to be much more environmentally friendly.

Q: What benefit can I expect from using Dyno-tab®?
A: A major benefit, and of primary importance to most customers, is the immediate increase in power and fuel economy due to the increase in octane. The typical octane improvement is in the range of 1 to 3 numbers, but this of course depends on the fuel used. Some people report a noticeable improvement in driveability. Others comment on improved fuel economy. Dyno-tab® also replaces lead protection, removes combustion chamber deposits and reduces smoke. It is important to note that the results will vary, depending on a number of factors, including the condition of the car, the quality of fuel, driving conditions, etc.

Q: How often should I use Dyno-tab® in my car?
A: For optimal benefit, Dyno-tab® should be used with every fill-up. This will increase the octane which provides power, will reduce smoke and emissions and keep your engine clean.

Q: I have an SUV with a large capacity fuel tank. How many Dyno-tabs® should I use with each fill-up?
A: For every 12-18 gallons, add one Dyno-tab® per fill-up. As an example, for a 35 gallon fill-up, add 2 tablets.

Q: If I do not fill the tank completely full, is it still safe to add one Dyno-tab®? Will the Dyno-tab® still dissolve?
A: The tank does not have to be completely full, but the ideal ratio is one Dyno-tab® for 10-16 gallons of fuel. The dosage does not have to be exact. Dyno-tab® will dissolve in a small amount of fuel, but we recommend not adding one to less than 6 gallons. We also do not recommend adding more than one Dyno-tab® per typical tank full, although it will still dissolve.

Q: I have a vintage car (1954 Chevrolet Bellaire) that requires leaded gasoline. If I add a Dyno-tab® with every fill-up, do I still need to use a liquid lead substitute?
A: No. Dyno-tab® completely replaces the typical lead substitute that you would purchase to add at each fill-up. By the way, antique/vintage car owners are some of our most loyal customers, because Dyno-tab® adds octane as well as the protection of lead. They love this product!

Q: What is the shelf life of Dyno-tab®? I would like to buy the "10-Tab Tube" and get the savings, but if it looses its effectiveness before I use all the Dyno-tabs®, then I will have wasted my money.
A: Dyno-tab® can be stored for 2 years in the blister pack as sold and 4 years in the 10-Tab Tube.

Q: Are any special storage conditions required for Dyno-tabs®?
A: Some of our customers store the unused Dyno-tabs® in the locked glove box or trunk of the car. External temperatures will not have any effect on the shelf life, and Dyno-tab® will not melt in warm conditions. Wherever you decide to store them, remember to keep Dyno-tabs® safely away from children.

Q: Does Dyno-tab® reduce emissions, and if so, do you guarantee that my 1990 Honda will pass the California emissions test if I use it?
A: Yes, Dyno-tab® reduces emissions in most cars, but the reduction levels depend on the condition of the car to begin with and the fuel used. Many customers do use Dyno-tab® prior to getting a smog test, and we have very strong test data to support the claim of reduced emissions, however, no, we do not guarantee your car will pass the test. There are many factors that can influence the outcome.

Q: Are there any tests I can do myself to see if this product really does work? I am a little skeptical.
A: If you have access to a dynamometer, run the diagnostics on your car prior to using Dyno-tab®. Then fill the tank and add one Dyno-tab®. When the tank is nearly empty, run the diagnostics again. This will give you a good idea of the immediate benefits. Try this again after further use. You may also have your mechanic test your emissions with a 4-gas analyzer. This shows the amount of unburned hydrocarbons that are passing out through the tailpipe. Run this test again after 2-3 fill-ups and see the difference. Unburned hydrocarbons is an indication of gasoline you purchased that is being wasted. A more complete burn of hydrocarbons means more power and/or more economy. It’s that simple.

Q: How do I know the Dyno-tab ® is safe to use in my car? Has it been tested?
A: Dyno-tab ® is backed by scientific data and was tested by leading automotive authorities. It has been sold for over four years in various markets worldwide with outstanding results. Dyno-tab ® is registered with the U.S. Environmental Protection Agency for both diesel and gasoline (petrol) engines.

Q: Can Dyno-tab ® be used for other types of gas-powdered engines?
A: Absolutely! One of our older forklifts is a gas-powdered model with a ten-gallon tank. We have added Dyno-tabs ® regularly for over 4 years, and when we don't add one, we can sure tell the difference. It would make a great sales demonstration. We also have customers who put the Dyno-tab ® MC in their lawnmowers, pleasure boats and snowmobiles. However, for smaller capacity gas tanks, like chainsaws, lawnmowers and weed-eaters, we recommend dissolving one Dyno-tab MC tablet in 2-4 gallons (10-20 liters) of fuel before adding to the tank.

Q: Is Dyno-tab ® safe for catalytic converters?
A: Yes. It is tested for compatibility with all automotive components, including catalytic converters and oxygen sensors.