If you are concerned about intruders, unexpected visitors, theft, mail tampering, or even dangerous areas for your children around the house, look no further than the newly patented and wireless Voice Alert™ Home Protection System. It notifies you of any intruder with your own voice.

The wireless, easy-to-use Voice Alert™ Kit is a notification system that works with infrared sensor/transmitters that can be placed indoors or out to detect motion up to 1,000' away (300' through walls).

This patented system is the only one that allows the user to customize their message to suit the situation. The motion detectors are weatherproof and install in seconds. The Voice Alert system runs off of an AC adaptor and has a 9V battery that serves as a back up, so your power will never fail. Monitor a 40 foot by 40 foot area and transmit up to 300 feet through walls or up to 1000 feet in open space.

Just record your messages and when movement is detected, your own message will warn you. Lets you know when cars enter your driveway, intruders approach your home, someone goes into your garage, visitors come near your front door, children or pets run through your yard and more.

Benefits:

• Find out if your teenager is sneaking out at night
• Be alerted if your toddler wanders into a potentially-dangerous room
• Survey two completely different places in your home, simultaneously

Features:

• Records 3 voice warning messages
• volume control knob and message playback buttons• Water-proof sensors
• Digital recording chip lets you easily change voice messages
• 9V battery backup protects during power outage
• An unlimited number of additional sensors can be controled by this base unit.

The kit also includes: (1) receiver, (2) infrared sensor/transmitters, (1) AC/DC adapter, (3) 9V batteries, double-sided tape and screws for mounting sensor/transmitters.

Extra motion sensors sold separately.

Easy to Use & Install

Step 1. Unpack your VOICE ALERT™ and identify all of the components.
Step 2. Install the 9V batteries (supplied) in the Receiver/Speaker and the Sensor/Transmitters.
Step 3. Attach the AC/DC power converter to the Receiver/Speaker and wall receptacle.
Step 4.Turn on the Receiver/Speaker by pressing the "POWER" button on the front of the Receiver/Speaker (red front panel LED will turn on)
Step 5. Record your personal voice messages.

A. On the back of the Receiver/Speaker slide the switch to "RECORD VOICE" position.

B. Press a desired message button #1 or #2 or #3

There are 3 voice messages that are available for the Sensor/Transmitters to activate.

C. While holding the message button speak into the "MIC" (6.5 seconds maximum)

D. Rear panel LED will light while recording

E. Return the slide switch to "Run" position

F. Repeat steps A-C for each message button

Please Note Additional Sensor Placement Instructions:

• Avoid installing Sensor/Transmitters on or near metalic surfaces such as: Metal doors, refigerators, washing machines, and aluminum siding.
• Sensor/Transmitters have an optimum detection area (40 feet X 40 feet) when installed at 7 1/2 feet above the floor.
• Lower installation will detect smaller persons or animals or objects and Sensor/Transmitters will have a decreased detection area.
• Make sure there are no obstructions or moving objects (tree limbs, etc) in desired detection area.
• Sensor/Transmitters should not be installed where they will face direct sunlight or oncoming automobile headlights (indirect light through a window will not cause a trigger).

Step 6. Install Sensor/Transmitter #1 in location and trigger message #1
Step 7. Install Sensor/Transmitter#2 in location and trigger message #2
Step 8. Press "PLAYBACK" on front of Receiver/Speaker to hear the message and stop LED from flashing.
Step 9. Adjust the "VOLUME" knob on the front of the Receiver/Speaker to desired volume level.

For your convenience the Sensor/Transmitters have been pre-programmed at the factory.

Do not drop any of the VOICE ALERT components as doing so may damage them.